Introduction The Steam Boat Association of Great Britain
Pugnacious
STEAMBOAT REGISTER - Edition 8, Jan/12
Owner: J. Alves. (SBA member)
Area: Trailable, California (USA).
HULLOpen launch
Built 1981 by Mike Lawler at Santa Barbara.
Designed by Fred Gollier.
Model: Skipjack
LOA: 14' 6", Beam: 6' 6".
GRP
Modified 1916 ‘Skipjack’ design, hard chine, white, varnished deck.
ENGINESingle, 23/8" x 3¼".
Built by John Hass & Jim Alves at Apple Valley, Ca.
Design: Little Engines, VT-225 (modified).
Valve(s): sv, Gear: SLRG.
Cast A frame, overhung crank, ecc driven fp, fw heater, 2½ HP at 500 rpm, Kcond.
BOILERRoberts type 3-drum HWT.
Built 1990-91 by Jim Alves.
Fuel: wood, Pressure: 150 psi, Heating Area: 18½ sqft.
Top drum 6.5/8" x 18", mud drums 2.3/8" x 19½", side tube banks .5/8" x 60", fore and aft tube banks ½" x 30", W kettle.
PROP3 square-end blades, bronze, 16" x 18".
Shaft: ball bearing thrust.
HISTORYNew launch fitted out by moulder and owner, steam plant installed by owner 1991. New single engine to be fitted 2000 hopefully!
SBA memberUSA
 
Click thumbnail image for
high-resolution photo

(Owner)

Data: Reg7. Index: [P] Previous: Puffin (HSL) Next: Pugwash
STEAMBOAT REGISTER © SBA 2012Click thumbnail for high-resolution image