Metric units


Marlin

Status: Undergoing renovation

Owner: Alistair Scott

Area: UK-Solent


Hull

Open Launch. Construction: GRP.
Hull model: Frolic 21
Built 1983 by Steam & Electric Launch Co. at Wroxham
Fit out 1985 by Mack Scott at River Hamble
LOA: 21' 0", LWL: 18' 0", Beam: 5' 7", Draft: 1' 8",
Straight stem, counter stern, white, varnished deck and interior, 8 seats, wheel steering.

Boiler

Scott Babcock WT Built 1985 by Mack Scott at Southampton
Fuel: Oil, Pressure: 140 psi, Heating area: 17 sqft, Output: 200 lbs/hr,
Copper tubes.
condensing, engine driven pump, steam feed pump, Windermere kettle, whistle,
1 drum with 2 box headers, copper tubes.

Engine

Compound. 2 1/2" + 4" X 3"
Built 1983 by Mack Scott at River Hamble
Design: 6A by: Stuart Turner Ltd. Henley-on-Thames
pv on HP, sv on LP valve. SLRG valve gear.
2 tfc, 2 cbs, engine driven fp and air pump with 3:1 Scotch crank drive.

Propeller

3 blades, 16" X 30"
Shaft: 1" Stainless Steel

History

New launch fitted out by previous owner, Mack Scott with mahogany and pine, plant installed and first steamed May 1985. Steamed each year since. Previously fitted with an original Liquid Fuel Engineering Company (LiFu) compound engine from 1999 for a number of years before reverting back to the Stuart Turner 6A.


Last Modified: 2017.12.15.


(Sue Milns) 1987

Photos


(Peter Massey) Windermere, 2005


Lifu engine previously fitted (Brian Smith)





(Bob Shearer) 2002


(Simon Maltby) Windermere, 2003